VLANs are software-based and not defined by physical attributes. As a result, VLANs have an unlimited number of ports and can be created per unit, per
device, per stack, or any other logical connection combination.
VLANs function at Layer 2. Since VLANs isolate traffic within the VLAN, a Layer 3 functioning router is needed to allow traffic to flow between VLANs. Layer 3
routers identify segments and coordinate with VLANs. VLANs are broadcast and multicast domains. Broadcast and multicast traffic is only transmitted in the
VLAN where the traffic is generated.
VLAN tagging provides a method for transferring VLAN information between VLAN groups. VLAN tagging attaches a four byte tag to packet headers. The VLAN
tag indicates to which VLAN the packet belongs. VLAN tags are attached to the packet by either the end station or by the network device. VLAN tags also
contain VLAN network priority information. Combining VLANs and GVRP allows network managers to automatically disperse VLAN information.To display the
VLAN page:
Click Switch > VLAN in the Tree View. The VLAN page opens.
l
VLAN Page
The VLAN page contains links for defining the following:
Defining VLAN Members
l
Defining VLAN Ports Settings
l
Defining VLAN LAG Settings
l
Configuring GVRP
l
Defining VLAN Members
The VLAN Membership page allows network managers to define VLAN groups. To open the VLAN Membership page:
Click Switch > VLAN > VLAN Membership in the Tree View. The VLAN Membership page opens.