Table of Contents
Advertisement
Remote Log Server Settings Page
The Remote Logs Server Settings page contains the following fields:
Available Servers—Contains a list of servers to which logs can be sent.
l
UDP Port (1-65535)—Indicates the UDP port to which the logs are sent for the selected server. The possible range is 1 - 65,535. The default value is
l
514.
Facility—Indicates the facility mapping level for the selected server. The default value is Local 0. The possible values are:
l
Local 0 - Local 7.
¡
No Map.
¡
Description—Displays the user-defined server description.
l
Delete Server—Deletes the currently selected server from the Available Servers list. The possible field values are:
l
Checked—Deletes the server from the Available Servers list.
¡
Unchecked—Maintains the server in the Available Servers list.
¡
The Remote Logs Server Settings page also contains a severity list. The severity definitions are the same as the severity definitions on the
Parameters
Page".
Sending logs to a server:
1. Open the Remote Logs Server Settings page.
2. Select a server from the Available Servers drop-down list.
3. Define the UDP Port, Facility, and Description fields.
4. Select the log severity in the Severity to Include check boxes.
5. Click Apply Changes. The log settings are saved, and the device is updated.
Defining a new server:
"Global Log
Advertisement
Table of Contents
