Add User Page
3. Define a new user name in the User Name, Access Level (1-15), Password, and Confirm Password fields.
4. Click Apply Changes. The new user is defined, and the device is updated.
Displaying the Local User Table:
1. Open the Local User Database page.
2. Click Show All. The Local User Table page opens.
Local User Table Page
Deleting Users:
1. Open the Local User Database page.
2. Click Show All. The Local User Table page opens.
3. Select a User Name.
4. Check the Remove check box.
5. Click Apply Changes. The user is deleted, and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Local User Database page.
CLI Command
username name [password password] [privilege level] [encrypted] Establishes a username-based authentication system.
The following is an example of the CLI commands:
Console (config)# username bob password lee privilege 15
Defining Line Passwords
Description