Table of Contents
Advertisement
RADIUS Settings Page
The RADIUS Settings page contains the following fields:
IP Address—Indicates the list of Authentication Server IP addresses.
l
Priority (1-65535)—Indicates the server priority. The possible values are 1-65535, where 1 is the highest value. This is used to configure the order in
l
which servers are queried.
Authentication Port—Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication.
l
Number of Retries (1-10)—Specifies the number of transmitted requests sent to RADIUS server before a failure occurs. The possible field values are 1-
l
10. Three is the default value
Timeout for Reply (1-30)—Specifies the amount of the time in seconds the device waits for an answer from the RADIUS server before retrying the
l
query or switching to the next server. The possible field values are 1-30. Three is the default value.
Dead Time (0-2000)—Specifies the amount of time (in sec) that a RADIUS server is bypassed for service requests. The range is 0-2000.
l
Key String (1-16 Characters)—Indicates the Key string used for authenticating and encrypting all RADIUS communications between the device and
l
the RADIUS server. This key is encrypted.
Source IP Address—Indicates the IP Address to use for the device accessing the RADIUS server.
l
The following fields set the RADIUS default values:
Default Timeout for Reply (1-30)—Specifies the default amount of time (in seconds) the device waits for an answer from the RADIUS server before
l
timing out.
NOTE:
If Host Specific Timeouts, Retransmit, Dead Time, or Deny values are not specified, the Global values are applied to each host.
Default Retries (1-10)—Specifies the default number of transmitted requests sent to RADIUS server before a failure occurs.
l
Default Dead time (0-2000)—Specifies the default amount of time (in seconds) that a RADIUS server is bypassed for service requests. The range is 0-
l
2000.
Default Key String (1-16 Characters)—Indicates the Default Key string used for authenticating and encrypting all RADIUS communications between
l
the device and the RADIUS server. This key is encrypted.
Advertisement
Table of Contents
