Table of Contents
Advertisement
name string
Adds a name to a VLAN.
The following is an example of the CLI commands:
Console # vlan database
Console (config-switch)#
Console (config-switch)# vlan 1972
Console (config-switch)# exit
Console (config)# interface vlan 19
Console (config-if)# name Marketing
VLAN Port Membership Table
The VLAN Port Membership Table contains a port table for assigning ports to VLANs. Ports are assigned VLAN membership by toggling through the port
control settings. Ports can have the following values:
VLAN Port Membership Control Settings
Port Control Definition
T
The interface is a member of a VLAN. All packets forwarded by the interface are tagged. The packets contain VLAN information.
U
The interface is a member of this member. Packets forwarded by the interface are untagged.
F
The interface is denied membership to a VLAN via GVRP.
Blank
The interface is not a member of this VLAN. Packets associated with the VLAN are not forwarded.
NOTE:
Ports that are LAG members are not displayed in the VLAN Port Membership Table.
The VLAN Port Membership Table displays the ports and the ports states, as well as LAGs.
VLAN Port Membership Table
Assigning ports to a VLAN group:
1. Open the VLAN Membership page.
2. Select a VLAN from the Show VLAN drop-down list.
3. Select ports in the Port Membership Table, and assign the port a value (v, t, f, or b).
4. Click Apply Changes. The ports are assigned to the VLAN group, and the device is updated.
Advertisement
Table of Contents
