1. Open the Remote Logs Server Settings page.
2. Click Add. The Add a Log Server page opens.
Add a Log Server Page
In addition to the fields in the Remote Logs Server Settings page, the Add a Log Server page contains the following field:
New Log Server IP Address—Specifies the IP address of the new Log Server.
l
To add a log server:
1. Define the New Log Server IP Address, UDP Port, Facility, and Description fields, and select the Severity to Include check boxes.
2. Click Apply Changes. The server is defined and added to the Available Servers list.
Displaying the Log Servers Table:
1. Open the Remote Logs Server Settings page.
2. Click Show All. The Log Servers Table page opens.
Log Servers Table Page
Removing a Log Server from the Log Servers Table page:
1. Open the Remote Logs Server Settings page.
2. Click Show All. The Log Servers Table page opens.
3. Select a Log Servers Table entry.
4. Check the Remove check box to remove the server(s).
5. Click Apply Changes. The Log Servers Table entry is removed and the device is updated.