2. Click Telnet. A Telnet session is initiated.
Configuring Device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Asset page.
CLI Command
hostname name
snmp-server contact text
snmp-server location text
clock set hh:mm:ss day month year
show clock
show system id
show system
asset tag
The following is an example of the CLI commands:
Console (config)# hostname dell
Console (config)# snmp-server contact Dell_Tech_Supp
Console (config)# snmp-server location New_York
Console (config)# exit
Console # exit
Console (config)# asset-tag lqwepot
Console> clock set 13:32:00 7 Mar 2002
Console> show clock
13:32:00 7 Mar 2002
console# show system
System Description: Ethernet Stackable Switching System
System Up Time (days,hour:min:sec): 0,00:30:58
System Contact: Dell_Tech_Supp
Description
Specifies or modifies the device host name.
Sets up a system contact.
Enters information on where the device is located.
Manually sets the system clock and date. Note the different date format.
Displays the time and date from the system clock.
Displays the service tag information.
Displays system information.
Displays the device asset tag.