Table of Contents
Advertisement
WRR Weight—Assigns WRR weights to egress queues. The possible field values are 1–255, where 1 is the lowest value and 255 is the highest value.
l
% of WRR Bandwidth—Indicates the amount of bandwidth assigned to the WRR.
l
Defining the Queue Settings:
1. Open the Queue Settings page.
2. Define Scheduling, WRR Weight, and Bandwidth fields.
3. Click Apply Changes. The Queue Settings page and the device are updated.
Assigning Queue Setting Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Queue Settings page.
CLI Command
wrr-queue bandwidth weight1 weight2 . weight_n
show qos interface [interface-id] [queuing]
The following is an example of the CLI commands:
Console (config)# wrr-queue bandwidth 10 20 30 40
Console (config)# exit
Console # exit
Console> show qos interface ethernet 1/e3 queueing
Ethernet 1/e3
wrr bandwidth weights and EF priority:
qid-weights Ef - Priority
1 — 10 dis- N/A
2 — 20 dis- N/A
3 — 30 dis- N/A
4 — 1 dis- N/A
Cos-queue map:
cos-qid
Description
Assigns Weighted Round Robin (WRR) weights to egress queues.
Displays interface QoS data.
Advertisement
Table of Contents
