Changing Printer Settings Using The Operator Panel; Entering Menu Mode; Navigating Through The Operator Panel; Menu Tree - NEC 1760 - SilentWriter B/W Laser Printer User Manual

Changing Printer Settings
Using the Operator Panel
In most cases, you will use your computer software to
change printer settings. When your software does not
support a feature, you can use the printer operator
panel to control the settings for that feature.
To change printer settings
1. Use the operator panel buttons to enter menu mode.
2. Then navigate through the menu tree selections.
These procedures are explained below. An example of
changing a printer setting is illustrated on the next page.
The complete operator panel menu tree is detailed on
the pages that follow.

Entering Menu Mode

Follow these three basic steps to enter menu mode
1. Turn on the printer, if necessary.
2. Press Online to turn the indicator light off and take
the printer offline. The display changes from
to .
NOT READY
3. Press Menu. The display changes to
, the first of the top-level menu
HANDLING
categories.
3–6 User's Guide

Navigating Through the Operator Panel

Menu Tree

You navigate through the menu tree by pressing the
menu selection buttons on the left side of the operator
panel.
• Press Next to go to the next item in a menu.
• Press Prev to go to the previous item in a menu.
• Press Select to go to the next menu level or to
choose the displayed setting if you are at the lowest
menu level.
• Press Menu to move back to the previous menu
level or to exit menu mode if you are already at the
READY
highest menu level.
note:
PAPER
menu tree, save your choices, and put the printer online.
Menu Select
Next
Prev
You can press Online at any time to exit the