Table of Contents
Advertisement
Loading Special Media
You can print on a wide variety of media with the
Silentwriter 1760/65. However, you should take certain
precautions when loading non-standard media.
Examples are given below.
Pre-printed forms:
Preprinted forms can be fed
through the multipurpose feeder. However, during
the print operation, heat applied to preprinted
forms can remove ink from the form and leave
residue (called offset) inside the printer. In addition
to offset residue problems, ink residues may
generate harmful gases and emissions. See
Appendix B for further specifications before using
preprinted forms.
If paper is heavier than 24 pounds
Heavy print stock:
(90 g/m2), use the multipurpose feeder. Do not use
paper heavier than 28 pounds (105 g/m2). Heavy
(thick) printed stock can generate misfeeds and
paper jams, in addition to causing excessive wear to
the print mechanism.
Perforated paper:
Perforated paper is not
recommended. This paper, along with cutout paper
such as die-cut or windowed stock, stands a greater
chance of generating a paper jam. If you choose to
use perforated feed paper, select paper that matches
specifications of standard white xerographic paper.
See Appendix B for further specifications before
using perforated paper.
4–16
User's Guide
Closing the Multipurpose Feeder
Follow these steps to close the multipurpose feeder
1. Remove any paper from the multipurpose feeder
2. If extended, fold the extension bar back into
position.
3. If extended, press the stopper back into position
4. Close the extension tray.
5. Lift and push the multipurpose feeder until it
latches.
Advertisement
Table of Contents
