Using The Ethernet Card With Os/2; Overview; Applicable Systems; Overall Steps - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Chapter 8
Using the Ethernet Card with OS/2
This chapter explains how to configure and use the Ethernet card with
an IBM OS/2 network. The instructions in this chapter are valid for
OS/2 Warp 3 and Warp 4 (OS/2 Warp Connect and OS/2 Warp
Server).
Overview
Applicable systems
OS/2 Warp 3, OS/2 Warp 4
lprportd (TCP/IP) of Warp
Shared printer
It is necessary to install the IBM OS/2 NetBIOS protocol.
Overall steps
Follow these basic steps for using the Ethernet card with OS/2. Go to
the indicated chapters for more information.
1.
Install TCP/IP protocol or NetBEUI protocol if necessary.
2.
Set the IP address using the arp command. See Chapter 3.
3.
Configure the Ethernet card for printing. See this chapter.
Using the Ethernet Card with OS/2 8-1
Advertisement
Table of Contents
