Creating Print Queues; Changing Configuration Settings - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Creating print queues

Use these settings when creating a print queue and setting the queue
information in the NetWare file server. See Chapter 4.
Note:
Only Bindery queues are supported. You have to log onto the NetWare server
with supervisor privileges.
Item
Queue list
New button
Delete button
Create Queue dialog box
File server
name
Queue name
Printer name
Print server
name

Changing configuration settings

You can see the Ethernet card parameters or change configuration
settings for your network protocol. Select your printer in the EPSON
Net!2 main dialog box and click the Configure button. See each
section below to change the appropriate settings for your network.
10-4 Using EPSON Net!2 and the Ethernet Card Home Page
Explanation
Shows the file server's list (when logged in as a
supervisor). Double-click the file server to show
the queues.
Click this button to open the Create Queue
dialog box and create a new queue.
Click the queue you want to delete, then click
the Delete button.
Shows the file server name selected in the tree.
Type a queue name up to 47 characters.
Type a printer name up to 47 characters.
Select a print server from the drop-down list.