Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 48
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Creating print queues in a file server
1.
From any NetWare client, log in to the network with supervisor
privileges.
2.
Run PCONSOLE. From the Available Options screen, select Print
Queue Information and press Enter.
3.
Press the Insert key on your keyboard and enter the print queue
name. Press Enter.
4.
From the Print Queue list, select the print queue name that you
just entered and press Enter.
From the Print Queue Information list, select Queue Users and
5.
press Enter.
6.
Select EVERYONE from the list. If EVERYONE is not in the list,
press Insert and select EVERYONE from the queue users list.
Creating a print server
1.
From the Available Options screen, select Print Server
Information and press Enter.
2.
Press the Insert key on your keyboard and type the print server
name. Press Enter. Write down this name for later use.
4-4 Using the Ethernet Card with NetWare
Advertisement
Table of Contents
