Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 90
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
5.
The IP Address Configuration and AppleTalk Configuration
dialog box appears.
Note:
See "Setting the IP address for EPSON Net!2 for Windows/
Macintosh" in Chapter 3 for more information about setting the IP
address.
6.
Set the following options in the AppleTalk Configuration box.
Printer Setting:
Printer Name:
Type the printer name (up to 31 characters). The default name
is shown below.
(Printer name)-(last 6 digits of the serial number)
Entity Type:
If you are using a Level 2 printer, you do not have to set these
options. EPSON Net!2 just shows the printer's Entity type on
an AppleTalk network.
If you are using a Level 1 printer, set the Entity type to match
the printer driver for the printer with the Ethernet card.
5-4 Using the Ethernet Card with Macintosh
Advertisement
Table of Contents
