Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 20
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
3.
Insert the card into the interface slot of your EPSON printer, then
tighten the screws to secure the card in the slot.
Note:
The location of the interface slot varies from printer to printer.
4.
If you are using the C82364* Ethernet card, connect the AC
adapter to the Ethernet card and plug the adapter into a wall
outlet.
5.
Plug the printer into the wall outlet.
6.
Turn on the printer while holding down the status sheet button
for about five seconds to initialize the Ethernet card.
1-4 Getting Started
status sheet button
interface slot
Advertisement
Table of Contents
