For Windows Nt 3.51/4.0 - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
4.
Select Microsoft from the list of manufacturers and TCP/IP from
the Network protocols list. Then click OK.
5.
Double-click TCP/IP on the Configuration menu to open the
TCP/IP Properties dialog box. Make necessary settings, such as
the IP address and subnet mask.
For Windows NT 3.51/4.0
Follow the steps below to install LPR software in Windows NT. If you
have already installed the TCP/IP Network Printing Service, skip
these steps.
Setting the IP Address 3-3
Advertisement
Table of Contents
