Installing Epson Status Monitor 2 - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
If you use your printer in a NetWare environment, you need to
connect to the print queue that is assigned to your printer before
installing EPSON Status Monitor 2.
1.
Click Start, point to Settings, and click Printers.
Double-click Add Printer.
2.
3.
Select Network printer, and click Next.
4.
Double-click the NetWare file server that services the print queue
assigned to your printer.
5.
All of the queues serviced by that file server appear in a list. Select
the correct print queue, and click OK. (If the printer driver is not
installed, a dialog box appears prompting you to select the
printer driver.)
6.
Click Yes to make your printer the default and click Next.
Click Finish.
7.
Installing EPSON Status Monitor 2
Note:
Turn off all other active applications (such as virus protection programs).
For instructions on how to do this, see your application or Windows
documentation.
Note for NT 3.51 & 4.0:
Before starting the installation, log on as Administrator.
1.
Insert the Ethernet card software CD-ROM in the drive.
11-2 EPSON Status Monitor 2 (Windows Only)
Advertisement
Table of Contents
