Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 180

You are unable to start EPSON Net!2 for Windows.
Cause
You have added or deleted
protocols after installing
EPSON Net!2 for Windows.
The message "NetWare cannot be used" appears when you start
EPSON Net!2.
Cause
There is no NetWare server. You may disregard it if you are using
You are unable to make settings using EPSON Net!2 for Intranet.
Cause
You haven't set the IP address
for the Ethernet card.
Note:
If you have a direct connection to the Internet (not dial-up), you may need
to apply to the InterNIC to obtain an IP address. Ask your system
administrator for more information.
12-2 Troubleshooting
What to do
Uninstall EPSON Net!2 for Windows
and reinstall it.
What to do
a TCP/IP environment to print. Click
OK to start EPSON Net!2 for
Windows.
What to do
Set the IP address for the Ethernet
card using EPSON Net!2 for
Windows/Macintosh or the arp
command, as described in Chapter 3.
You can check the IP address on the
status sheet.