Overall Steps; Printing With Tcp/Ip; Printing Via The Lpr Port For Windows Nt 3.51 - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Overall steps

Follow these steps to set up and use the Ethernet card with Windows
NT. Go to the indicated chapters for more information.
1. Install TCP/IP components, if necessary. See Chapter 3.
2. Install NetBEUI components, if necessary. See this chapter.
Note:
If you use the Ethernet card with TCP/IP, you only need TCP/IP. If you
use the Ethernet card with NetBEUI, you need both TCP/IP and
NetBEUI. You need TCP/IP when you use NetBEUI to access the
Ethernet card home page.
3. Install EPSON Net!2 for Windows. See Chapter 2.
4. Assign an IP address to the Ethernet card using EPSON Net!2 or
the arp command. See Chapter 3.
5. Configure the NetBEUI settings on the Ethernet card home page.
See this chapter.
6. Set up the printer on the workstations that will use it. See this
chapter.

Printing with TCP/IP

If you haven't installed TCP/IP, you need to install it, as described
in Chapter 3.

Printing via the LPR port for Windows NT 3.51

To use the printer with the Ethernet card and Windows NT, connect
the network printer to your computer using the LPR port.
If you are using the printer on a TCP/IP network with Windows NT
(LPR), follow the steps in the next sections.
7-2 Using the Ethernet Card with Windows NT