Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 78

5. Click the Remote Printer tab and make the following settings.
Primary print server name:
Select the print server name you have created.
Printer port number:
Type the same port number you assigned to the print
server (0).
Click OK to save changes. If the message "Configuration is
6.
successfully done" appears on your screen, the update is
complete.
c
Caution:
Once you make changes to the Ethernet card, you must wait
until it completes the settings before turning off the printer.
7. Select Printer Status from the Console screen of the print server.
Select a printer from the list and check the status.
8. Select Queues serviced. Check if the print queue name which
you set in step 5 on page 4-26 exists in the Print Queues Serviced
By Printer box.
4-34 Using the Ethernet Card with NetWare