Dell PowerEdge M420 Owner's Manual page 101

Error Code Message Information
RFM2004
Message
LCD Message
Details
Action
RFM2006
Message
Details
Action
SEC0003
Message The processor area is open.
Details The processor area is open. A drive may be added or removed. System performance may be
degraded.
Action Close the processor area. Check system logs.
SEC0004
Message
Details
Action
SEC0040
Message
Details
Action
SEC0041
Message
LCD Message
Details
Action
SEC0042
Message
LCD Message CPU detected an error while performing a TXT operation. Check system configuration.
Details
Action
SEC0043
Message
LCD Message BIOS detected a TXT error during POST. Check system configuration.
Failure detected on Internal Dual SD Module <
Internal Dual SD Module <
The SD card module is installed but improperly configured or failed to initialize.
Reinstall the SD module and remove and reinstall SD cards.
Internal Dual SD Module <
The module is write-protected. Changes may not be written to the media.
If unintended, remove the media and disable write protection.
The LAN is disconnected.
The LAN is disconnected. Network performance may be degraded.
If unintentional, connect network cable.
A critical stop occurred during OS load.
Operating system generated critical stop IPMI event. (Sensor type code = 20H)
Check video and operating system logs for additional information
BIOS detected an error configuring the Intel Trusted Execution Technology (TXT).
BIOS detected an error configuring TXT. Check system configuration.
TXT initialization failure. System configuration may have changed.
Check system hardware inventory and software configuration.
Processor detected an error while performing an Intel Trusted Execution Technology
(TXT) operation.
TXT CPU microcode boot failure. System configuration may have changed.
Check system hardware inventory and software configuration.
BIOS Authenticated Code Module detected an Intel Trusted Execution Technology
(TXT) error during POST.
name >.
name > failed. Check SD Card.
name > is write protected.
101