Dell PowerEdge M420 Owner's Manual page 92

Error Code Message Information
PST0130
Message
LCD Message Memory is configured, but not usable. Check memory devices
Details
Action
PST0131
Message
LCD Message System BIOS shadow failed. Check memory devices.
Details
Action
PST0132
Message
LCD Message CMOS failed. Power cycle system.
Details
Action
PST0133
Message
LCD Message
Details
Action
PST0134
Message
LCD Message
Details
Action
PST0135
Message
LCD Message
Details
Action
PST0136
Message
LCD Message
Details
92
Memory is configured, but not usable.
The system BIOS encountered device failures or speed configurations that resulted in
unused memory.
Re-seat the memory modules. If the issue persists, see
System BIOS shadow failed.
Memory errors occurred copying BIOS image into system memory.
Remove input power. Reduce system memory to minimum configuration and apply input
power.
CMOS failed.
System BIOS detected a failure with CMOS memory during system POST.
Check system event log for CMOS battery exceptions. Remove and reapply input
power. If the issue persists, see
DMA controller failed.
DMA controller failed. Power cycle system.
System BIOS detected a failure with the DMA controller during system POST.
Remove and reapply input power.
Interrupt controller failed.
Interrupt controller failed. Power cycle system.
System BIOS detected a failure with the interrupt controller during system POST.
Remove and reapply input power. If the issue persists, see
Timer refresh failed.
Timer refresh failed. Power cycle system..
System BIOS detected a timer refresh failure during system POST.
Remove and reapply input power. If the issue persists, see
Programmable interval timer error.
Programmable interval timer error. Power cycle system.
System BIOS detected an failure with the programmable interval timer during POST.
Getting
Getting Help.
Help.
Getting Help.
Getting Help.