Dell PowerEdge M420 Owner's Manual page 94

Error Code Message Information
Details
Action
PST0192
Message
LCD Message Shut-down test failed. Power cycle system.
Details
Action
PST0193
Message
LCD Message BIOS POST memory test failed. Check memory devices.
Details
Action
PST0194
Message
LCD Message
Details
Action
PST0195
Message
LCD Message CPU configuration failed. Check screen message.
Details
Action
PST0196
Message
LCD Message
Details
Action
PST0254
Message
LCD Message
Details
94
TXT boot failed. This could be related to memory errors or an error with the system TXT
configuration. A socketed TPM module may have been removed.
Check TPM presence. Remove and reapply input power. If the issue persists, see
Getting Help.
Shut-down test failed.
System BIOS shutdown test failed during POST.
Check system event log for CMOS battery exceptions. Remove and reapply input
power. If the issue persists, see
BIOS POST memory test failed.
System BIOS POST memory test failed.
Compare system memory installation to supported system memory configurations.
Reduce system configuration to minimum memory configuration.
Remote access controller configuration failed.
Remote access controller configuration failed. Check screen message.
System BIOS could not configure the Remote Access controller.
Cycle input power and power on the system. If the issue persists, see
CPU configuration failed.
The current processor configuration is unsupported or encountered a fatal exception
during POST.
Review system processor configuration and reduce the system to the minimum
configuration.
Incorrect memory configuration.
Incorrect memory configuration. Review User Guide.
System BIOS detected an invalid memory population.
Reinstall memory to match supported memory configuration.
General failure after video.
General failure after video. Check screen message.
System BIOS detected a functional or configuration issue during system POST.
Getting Help.
Getting Help.