Installing The Ssd Backplane - Dell PowerEdge M420 Owner's Manual
Dell poweredge m420 systems owner's manual
Hide thumbs
Also See for PowerEdge M420:
- Reference manual (1682 pages) ,
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages)
Table of Contents
Advertisement
3.
Slide the blue release latches up.
4.
Slide the SSD backplane away from the card-edge connector on the management riser card and lift the SSD
backplane out of the blade.
Figure 13. Removing and Installing the SSD Backplane
1. SSD backplane
2. SSD backplane connector
3. card-edge connector (on management riser card)
4. release latches (2)
Installing The SSD Backplane
1.
Align the backplane connector with the card edge connector on the management riser card.
2.
Slide the SSD backplane in until it engages securely with the card-edge connector on the management riser card.
3.
Push the blue release tabs down to lock the SSD backplane.
4.
Install the SSD(s).
5.
Install the blade in the sleeve.
35
Advertisement
Table of Contents
Troubleshooting
