Dell PowerEdge M420 Owner's Manual page 71

Error Code Message Information
Action
CBL0006
Message Multiple storage controllers are incorrectly connected to the same backplane <
Details Unsupported backplane configuration.
Action Check backplane configuration. Reconnect cable. If the issue persists, see
CPU0000
Message
LCD Message CPU <
Details
Action
CPU0001
Message
LCD Message CPU <
Details
Action
CPU0002
Message CPU <
Action
CPU0003
Message CPU <
Action
CPU0004
Message CPU <
Action
Check system fans. Replace the <
number > has an internal error (IERR).
CPU <
number > has an internal error (IERR).
System event log and OS logs may indicate that the exception is external to the
processor.
Review System Event Log and Operating System Logs. If the issue persists, see
Help.
number > has a thermal trip (over-temperature) event.
CPU <
number > has a thermal trip. Check CPU heat sink.
The processor temperature increased beyond the operational range.
Review logs for fan failures, replace failed fans. If no fan failures are detected, check
inlet temperature (if available) and reinstall processor heat-sink.
number > has failed the built-in self-test (BIST).
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
number > is stuck in POST.
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Reduce system configuration to minimum memory and remove all PCI devices. If
system completes POST, update system BIOS. reinstall memory and PCI one
component at a time to meet the original configuration.
3. If the issue persists, see
number > failed to initialize.
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
name > battery.
Getting Help.
Getting Help.
Bay ID >.
Getting Help.
Getting
71