Dell PowerEdge M420 Owner's Manual page 114

Error Code Message Information
Action
VLT0213
Message
LCD Message The disk drive bay <
Details
Action
VLT0214
Message
LCD Message The disk drive bay <
Details
Action
VLT0215
Message
LCD Message The disk drive bay <
Details
Action
VLT0216
Message
LCD Message The <
114
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is less than the lower critical threshold.
The disk drive bay <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is greater than the upper critical threshold.
The disk drive bay <
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
The disk drive bay < name > voltage is greater than the upper critical threshold.
name > voltage is outside of range.
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is outside of range.
The <
name > voltage is outside of range.
Getting Help.
Getting Help.
Getting Help.
Getting Help.