Dell PowerEdge M420 Owner's Manual page 74

Error Code Message Information
Action
CPU0203
Message
LCD Message CPU <
Details
Action
CPU0204
Message
LCD Message CPU <
Details
Action
CPU0700
Message
LCD Message
Details
Action
CPU0701
Message
LCD Message CPU <
Details
74
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
CPU < number > < name > voltage is greater than the upper critical threshold.
number > < name > voltage is outside of range. Re-seat CPU.
High voltages may be the result of problem with the voltage regulator or a problem with
the processor. Elevated voltages may result in damage to the processor or other
system electrical components. The system may power down.
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
number > < name > voltage is outside of range.
CPU <
number > < name > voltage is outside of range. Re-seat CPU.
Voltages outside the allowable range may damage electrical components or may cause
the system to shutdown.
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
4. If the issue persists, see
number > initialization error detected.
CPU <
number > initialization error detected. Power cycle system.
CPU <
System BIOS was unable to initialize the processor.
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
4. If the issue persists, see
number > protocol error detected.
CPU <
number > protocol error detected. Power cycle system.
System event log and operating system logs may indicate that the exception is external
to the processor.
Getting Help.
Getting Help.
Getting Help.
Getting Help.