Dell PowerEdge M420 Owner's Manual page 79
Dell poweredge m420 systems owner's manual
Hide thumbs
Also See for PowerEdge M420:
- Reference manual (1682 pages) ,
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages)
Table of Contents
Advertisement
Error Code Message Information
Action
HWC3004
Message
Action
HWC4000
Message
LCD Message Incompatibility between BMC/iDRAC firmware and CPU. Update firmware.
Details
Action
HWC4002
Message A hardware incompatibility detected between BMC/iDRAC firmware and other hardware.
Details
A hardware incompatibility was detected between BMC/iDRAC firmware and other
hardware. An iDRAC or BMC firmware update is needed.
Action
Update the BMC/iDRAC firmware. If the issue persists, see
HWC4011
Message Hardware unsuccessfully updated for mezzanine card <
Action
Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the
issue persists, see
HWC4013
Message Hardware unsuccessfully updated for embedded NIC.
Action
Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see
Getting
HWC4015
Message
Link Tuning error detected.
Details
CMC has old firmware. After updating the firmware the CMC will recognize the device.
Action
Update the CMC firmware. If the issue persists, see
HWC5001
Message
Action
HWC5002
Message
A fabric mismatch detected on <
Details
The fabric type for the IOM and mezzanine cards must match.
Action
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
HWC5004
Message
A link tuning failure detected on <
Details
CMC has old firmware. After updating the firmware the CMC will recognize the device.
If removal was unintended, check presence of the server, then reinsert.
number > is removed.
IO module <
If removal was unintended, check presence of the IO module, then reinsert.
A hardware incompatibility detected between BMC/iDRAC firmware and CPU.
A hardware incompatibility was detected between BMC/iDRAC firmware and
Processor(s). An iDRAC or BMC firmware update is needed.
Update the BMC/iDRAC firmware. If the issue persists, see
Getting
Help.
Help.
name > is offline.
<
If unexpected, check presence, then reinstall or reconnect.
number >.
Getting
name >.
name >.
Getting
Help.
Getting
Help.
Help.
79
Advertisement
Table of Contents
Troubleshooting
