Dell PowerEdge M420 Owner's Manual page 102

Error Code Message Information
Details
Action
SEC0044
Message
LCD Message SINIT detected a TXT error at boot. Check system configuration.
Details
Action
SEC0600
Message
Details
Action
SEC0602
Message
Details
Action
SEC0604
Message
Details
Action
SEC0606
Message
Details
Action
SEC0608
Message
Details
Action
SEC0610
Message
Details
Action
SEL0002
Message
Details
Action
102
TXT Post failure. System configuration may have changed.
Check system hardware inventory and software configuration.
SINIT Authenticated Code Module detected an Intel Trusted Execution Technology
(TXT) error at boot.
TXT initialization failure. System configuration may have changed.
Check system hardware inventory and software configuration.
A secure mode violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
User password violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
A setup password violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
The network boot password violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
A password violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
An Out-of-band password violation detected.
This may apply to a remote access attempt.
Check system logs for intrusion attempts, and ensure strong password policies.
Logging is disabled.
This message is displayed when event logging of a specific type is disabled by the user.
If unintended, re-enable logging.