Fip Snooping On Vlans; Fc-Map Value; Bridge-To-Fcf Links; Impact On Other Software Features - Dell PowerEdge M IO Aggregator Command Reference Manual

FIP Snooping on VLANs

FIP snooping is enabled globally on an Aggregator on all VLANs:
• FIP frames are allowed to pass through the switch on the enabled VLANs and are processed to
generate FIP snooping ACLs.
• FCoE traffic is allowed on VLANs only after a successful virtual-link initialization (fabric login
FLOGI) between an ENode and an FCF. All other FCoE traffic is dropped.
• At least one interface is auto-configured for FCF (FIP snooping bridge-FCF) mode on a FIP
snooping-enabled VLAN. Multiple FCF trusted interfaces are auto-configured in a VLAN.
• A maximum of eight VLANS are supported for FIP snooping on an Aggregator. FIP snooping
processes FIP packets in traffic only from the first eight incoming VLANs.

FC-MAP Value

The FC-MAP value that is applied globally by the Aggregator on all FCoE VLANs to authorize FCoE
traffic is auto-configured.
The FC-MAP value is used to check the FC-MAP value for the MAC address assigned to ENodes in
incoming FCoE frames. If the FC-MAP value does not match, FCoE frames are dropped. A session
between an ENode and an FCF is established by the switch-bridge only when the FC-MAP value on the
FCF matches the FC-MAP value on the FIP snooping bridge.

Bridge-to-FCF Links

A port directly connected to an FCF is auto-configured in FCF mode. Initially, all FCoE traffic is blocked;
only FIP frames are allowed to pass.
FCoE traffic is allowed on the port only after a successful FLOGI request/response and confirmed use of
the configured FC-MAP value for the VLAN.

Impact on other Software Features

FIP snooping affects other software features on an Aggregator as follows:
• MAC address learning: MAC address learning is not performed on FIP and FCoE frames, which are
denied by ACLs dynamically created by FIP snooping on server-facing ports in ENode mode.
• MTU auto-configuration: MTU size is set to mini-jumbo (2500 bytes) when a port is in Switchport
mode, the FIP snooping feature is enabled on the switch, and FIP snooping is enabled on all or
individual VLANs.
• Link aggregation group (LAG): FIP snooping is supported on port channels on ports on which PFC
mode is on (PFC is operationally up).
98 | FIP Snooping