Setting The Time Zone - Dell PowerEdge M IO Aggregator Command Reference Manual

Setting the Time Zone

Universal time coordinated (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, you must include the
differentiator between the UTC and your local timezone. For example, San Jose, CA is the Pacific
Timezone with a UTC offset of -8.
To set the timezone, use the following command:
Command Syntax
clock timezone timezone-name offset
Command Mode Purpose
CONFIGURATION Set the clock to the appropriate timezone.
timezone-name
not use spaces.
offset:
•
•
FTOS#conf
FTOS(conf)#clock timezone Pacific -8
FTOS#
: Enter the name of the timezone. Do
Enter one of the following:
a number from 1 to 23 as the number of hours in
addition to UTC for the timezone.
a minus sign (-) followed by a number from 1 to
23 as the number of hours.
System Time and Date | 227