Verifying A Stack Configuration; Using Leds; Using Show Commands - Dell PowerEdge M IO Aggregator Command Reference Manual

Mxl 10/40gbe switch io module ftos command reference guide, ftos 8.3.16.1
Hide thumbs Also See for PowerEdge M IO Aggregator:
Table of Contents

Advertisement

Verifying a Stack Configuration

Using LEDs

Table 17-2
diodes (LEDs) on its front panel.
Table 17-2. System Status LED on a Stacked Switch
Color
Blue
Off
Amber

Using Show Commands

To display information on the stack configuration, use the
switch.
Table 17-3. Displaying Stack Configurations
Command
show system [brief]
show inventory optional-module
show system stack-unit
configured
(Figure
show system stack-unit
(Figure
17-22)
show system stack-ports [status | topology]
(Figure
17-23)
Figure 17-18. show system brief Command Example
FTOS# show system
StStack MAC : 00:1e:c9:f1:00:9b
--
Stack Info
Unit
UnitType
------------------------------------------------------------------------------------
0
Management
1
Standby
2
Member
3
Member
4
Member
5
Member
212
|
Stacking
lists the status of a stacked switch according to the color of the System Status light emitting
Meaning
The switch is operating as the stack master or as a standalone unit.
The switch is a member or standby unit.
The switch is booting or a failure condition has occurred.
(Figure 17-18
and
Figure
17-19)
(Figure
17-20)
unit-number
stack-group
17-21)
unit-number
stack-group
brief
--
Status
online
online
not present
not present
not present
not present
show
Output
Displays stacking roles (master, standby, and member units) and
the stack MAC address.
Displays the FlexIO modules currently installed in expansion
slots 0 and 1 on a switch and the expected module logically
provisioned for the slot.
Displays the stack groups allocated on a stacked switch. Valid
stack-unit numbers: 0 or 1.
Displays the port numbers that correspond to the stack groups on
a switch. Valid stack-unit numbers: 0 or 1.
Displays the type of stack topology (ring or daisy chain) with a
list of all stacked ports, port status, link speed, and peer stack-unit
connection.
ReqTyp
CurTyp
I/O-Aggregator
I/O-Aggregator
I/O-Aggregator
I/O-Aggregator
commands in
Table 17-3
Version
Ports
8-3-17-46
56
8-3-17-46
56
on the master

Advertisement

Table of Contents
loading

Table of Contents