Iscsi Optimization; Iscsi Optimization Overview - Dell PowerEdge M IO Aggregator Command Reference Manual

iSCSI Optimization

An Aggregator auto-configures to enable internet small computer system interface (iSCSI) optimization
with default iSCSI parameter settings
support:
• Detection and Autoconfiguration for Dell EqualLogic Arrays
• Detection and Port Configuration for Dell Compellent Arrays
You can use show commands to display information on iSCSI configuration and sessions
iSCSI Optimization
iSCSI optimization enables quality-of-service (QoS) treatment for iSCSI traffic.

iSCSI Optimization Overview

iSCSI is a TCP/IP-based protocol for establishing and managing connections between IP-based storage
devices and initiators in a storage area network (SAN).
iSCSI optimization provides a means of monitoring iSCSI sessions and applying QoS policies on iSCSI
traffic. When enabled, iSCSI optimization allows a switch to monitor (snoop) the establishment and
termination of iSCSI connections. The switch uses the snooped information to detect iSCSI sessions and
connections established through the switch.
iSCSI optimization allows you to reduce deployment time and management complexity in data centers. In
a data center network, Dell EqualLogic and Compellent iSCSI storage arrays are connected to a converged
Ethernet network using the data center bridging exchange protocol (DCBX) through stacked and/or
non-stacked Ethernet switches.
Figure 11-1 shows iSCSI optimization between servers in an M1000e enclosure and a storage array in
which a stack an Aggregator connects installed servers (iSCSI initiators) to a storage array (iSCSI targets)
in a SAN network. iSCSI optimization running on the Aggregator is configured to use dot1p priority-queue
assignments to ensure that iSCSI traffic in these sessions receives priority treatment when forwarded on
Aggregator hardware.
(Default iSCSI Optimization
Information).
11
Values) and is auto-provisioned to
(Displaying
iSCSI Optimization | 149