Dell PowerEdge M IO Aggregator Command Reference Manual page 92

Table 6-5. show interface dcbx detail Command Description
Local DCBX Configured mode
Peer Operating version
Local DCBX TLVs Transmitted
Local DCBX Status:
DCBX Operational Version
Local DCBX Status:
DCBX Max Version Supported
Local DCBX Status:
Sequence Number
Local DCBX Status:
Acknowledgment Number
Local DCBX Status:
Protocol State
Peer DCBX Status:
DCBX Operational Version
Peer DCBX Status:
DCBX Max Version Supported
Peer DCBX Status:
Sequence Number
Peer DCBX Status:
Acknowledgment Number
Total DCBX Frames transmitted
Total DCBX Frames received
Total DCBX Frame errors
Total DCBX Frames
unrecognized
78 | Data Center Bridging (DCB)
Field
DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port
auto-configures to use the DCBX version received from a peer).
DCBX version that the peer uses to exchange DCB parameters.
Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV
code at the top of the show command output).
DCBX version advertised in Control TLVs.
Highest DCBX version supported in Control TLVs.
Sequence number transmitted in Control TLVs.
Acknowledgement number transmitted in Control TLVs
Current operational state of DCBX protocol: Waiting for ACK or IN-SYNC.
DCBX version advertised in Control TLVs received from peer device.
Highest DCBX version supported in Control TLVs received from peer device.
Sequence number transmitted in Control TLVs received from peer device.
Acknowledgement number transmitted in Control TLVs received from peer
device.
Number of DCBX frames sent from local port.
Number of DCBX frames received from remote peer port.
Number of DCBX frames with errors received.
Number of unrecognizable DCBX frames received.
Description