Enabling Dcb On Next Reload; Enabling Auto-Dcb-Enable Mode On Next Reload - Dell PowerEdge M IO Aggregator Command Reference Manual

Enabling DCB on Next Reload

To configure the Aggregator so that all interfaces come up with DCB enabled and flow control disabled,
use the
dcb enable on-next-reload
for DCB to be enabled on all interfaces. Internal PFC buffers are automatically configured.
Task
Globally enable DCB on all interfaces
after next switch reload.
To reconfigure the Aggregator so that all interfaces come up with DCB disabled and link-level flow control
enabled, use the
reload the switch for DCB to be disabled on all interfaces. PFC buffer memory is automatically freed.

Enabling Auto-DCB-Enable Mode on Next Reload

To configure the Aggregator so that all interfaces come up in auto-DCB-enable mode with DCB disabled
and flow control enabled, use the
configuration change and reload the switch for auto-DCB-enable mode to be enabled on all interfaces.
Task
Globally enable auto-detection of DCBX
and auto-enabling of DCB on all
interfaces after switch reload.
Figure 6-6. dcb enable auto-detect on-next-reload Command Example
FTOS#dcb enable auto-detect on-next-reload
Aug 25 18:47:50: %STKUNIT0-M:CP %DIFFSERV-6-DCB_ENABLE_CFG_ON_RELOAD: Global DCB will be
enabled on subsequent reload, PFC buffers will be reserved for all pfc ports and max loss
less queues supported for each stack unit. For the pfc-buffering change to take effect,
please save the config and reload the system.
58 | Data Center Bridging (DCB)
command. You must save the configuration change and reload the switch
no dcb enable on-next-reload
dcb enable aut-detect on-next-reload
Command Command Mode
dcb enable
CONFIGURATION
on-next-reload
command. You must save the configuration change and
Command Command Mode
dcb enable
CONFIGURATION
auto-detect
on-next-reload
command. You must save the