Toshiba Strata CIX Programming Manual page 139

Program Code
32
50
516
51
52
80
98
18
48
517 51
52
52
32
52
49
52
518
80
48
82
33
519
80
520 -
51
521
98
51
522
98
523 -
524 -
Strata CIX/CTX Telephone Button Programming 11/04
Sub-
Occurred FB
parameter
FB02
FB01
FB00
FB00
FB00
FB00
FB01
FB01
FB01
FB01
FB01
FB02
FB02
FB02
FB02
FB02
FB00
FB00
-
-
FB00
-
FB00
-
-
-
Error Descriptions
A character that is not permitted is used in the Speed Dial
number.
The allowable number of Speed Dial Bins has been
exceeded.
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
The entered value conflicts with an existing numbering plan.
The entered PrimeDN does not exist.
The allowable Short-dial number has been exceeded.
Multiple Calling Pilot DN is not assigned.
Cannot delete Multiple Calling Pilot DN.
The Multiple Calling Pilot DN entered is using in a part of the
numbering plan, extension number, etc.
The Multiple Calling DN entered is an already existing DN .
The Multiple Calling Pilot DN entered already exists.
ISDN station cannot be assigned to the destination number.
Cannot delete Multiple Calling Pilot DN.
The Multiple Calling Pilot DN entered is using in a part of the
numbering plan, extension number, etc.
The plural trunk access number can not assign in the same
Multiple Calling Group.
Cannot assign the destination number because the Multiple
Calling Group does not exist.
The destination type and the destination number must be
assigned at the same time.
The Multiple Calling Group entered is out of the range.
The Multiple Calling Group entered is out of the range.
The Multiple Calling Group entered does not exist.
No error occurs for this Program except for common errors.
The Route Plan Number must be complete to be registered to
the Route Plan Table.
The allowable number of participants in the Route Plan Table
has been exceeded.
The Exception Route Plan Number must be complete to be
registered to the Route Plan Table.
The allowable number of participants in the Route Plan Table
has been exceeded.
No error occurs for this Program except for common errors.
No error occurs for this Program except for common errors.
System Error Codes
Service Programming Error Codes
2-23