Toshiba Strata CIX Programming Manual page 65

Table 1-28 Programs 303~315 (continued)
Button Sequence
309-02 MOH Source
FB02 Hold
, n,
309-03 GCO Key Group
FB03 Hold
, n,
309-04 Pool Key Group
FB04 Hold
, n,
309- Audio Day1/Day2/
05~07 Night Destination
Type
FB05 FB07 Spkr
~ , n,
Audio Day1/Day2/
Night Destination
Digits
Hold
n1,
309- Data Day1/Day2/
08~10 Night Destination
Type
FB08 FB10 Spkr
~ , n,
Data Day1/Day2/
Night Destination
Digits
Hold
n1,
Strata CIX/CTX Telephone Button Programming 11/04
Value(s)
n = 1. Quiet Tone
2. External 1 (default)
3. External 2
4. External 3
5. External 4
6. External 5
7. External 6
8. External 7
9. External 8
10. External 9
11. External 10
12. External 11
13. External 12
14. External 13
15. External 14
16. External 15
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
n1 = Up to 32 digits
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
n1 = Up to 32 digits
Telephone Button Programming
Summary
Set Music On Hold for Analog ISDN DID Trunk
GCO Key Group number.
Pooled Line Key Group
Select the Destination Type for Audio/Speech calls.
Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
Select the Destination Type for Audio/Speech calls.
Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
300 Series Programs
1-61