Toshiba Strata CIX Programming Manual page 51

Table 1-25 Programs 208~218 (continued)
Button Sequence
209 Station Hunting Group
209 Hold
,
209-00 Group Number
Hold
n,
209-01 Hunt Method
FB01 Hold
, n,
209-02 Pilot Number
FB02 Hold
, n,
209-04 Number to Display
FB04 Hold
, n,
209-05 Pilot No. SCF
FB05 Hold
, n,
209-06 Multiple DN Hunt
FB06 Hold
, n,
209-07 DHG Auto Camp-on
FB07 Hold Hold
, n, ,
210 Group Call Pickup
210 Hold
,
210-00 Primary DN
Hold
n,
210- Group 1~32
01~32
FB01~FB32 Hold
, n,
Hold
211 Delete Station
Hunting Group
211-00 Delete Station
Hunting Group
213 ADM Feature Keys
213 Hold
,
213-00 PDN+ADM
Hold
yyyyyx,
Strata CIX/CTX Telephone Button Programming 11/04
Value(s)
n = Up to 3 digits
1~90 (CTX100)
1~200 (CTX670 Basic)
1~640 (CTX670 Exp.)
(default = no value)
n = 1. Serial
2. Circular (for Multiple
DN hunt groups)
(default)
3. Distributed (for Voice
Mail hunt groups)
n = Up to 5 digits
n = Up to 5 digits
n = 0~4 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Exp.)
(default = 0)
n = 1. Enable (default)
2. Disable
n = 1. Enable
2. Disable (default)
n = Up to 5 digits
n = 1. Yes
2. No (default)
,
n = 1~90 (CTX100)
1~200 (CTX670 Basic)
1~640 (CTX670 Exp.)
(default = 0)
yyyyy Primary DN (0~99999)
=
ADM (1 or 2)
x =
Telephone Button Programming
Summary
This command assigns Station Hunting Group data.
Hunt Group Number.
Select Hunt Method.
Enter Pilot Directory Number. This is the number that is dialed to call
the hunt group.
Note Any type of hunt group can have a pilot number. Distributed
hunt groups must have a pilot number. Voice Mail hunt groups
should be Distributed with a Pilot Number. Multiple DN Hunt
groups should be Circular with no Pilot Number.
Enter the number that displays when called by, or when calling any
member of the hunt group.
Note This number should be the DH Group Pilot number for Voice
Mail hunt groups. This number could be the PDN of a Multiple
DN Hunt group, in which case the number would override the
number assigned in Program 200, FB15 for PDNs and
Program 206, FB04 for Phantom DNs.
Allows you to assign a System Call Forward pattern to the Pilot
Number of a Hunt Group.
Enable if hunt group is created for multiple DN operation. Multiple DN
hunt groups should be circular with no pilot number.
Whether to execute Automatic Camp On to the Distributed Hunt
Group or not.
Should be applied to VM Distributed Hunt Groups so callers
automatically camp on to Voice Mail when all VM ports are busy.
Does not apply to Circular or Serial hunt groups.
The Call Pickup Group assignment specifies which group numbers
this station will participate when either the Group Call Pickup or the
Group Directed Call Pickup features are invoked. A user may be
assigned to more than one group.
Enter the Primary DN.
Indicate whether this station is to participate in this Call Pickup group.
Note 01~05 are available for CTX100, 01~10 are available for
CTX670 Basic, and 01~32 are available for CTX670 Exp.
Delete Station Hunting Group
Delete Station Hunting Group
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when ringing
occurs.
Enter a Primary DN plus an ADM number to Program ADM FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.
200 Series Programs
1-47