Hold Key - Toshiba Strata CIX Programming Manual

Telephone Button Programming
200 Series Programs
Table 1-24
Data for Single Touch Button
Spdial
Redial
Cnf/Trn
Vol Up
Vol Down
DKTís FB
ADMís FB
DSSís FB
Note & means ESC code
Example for Setting the data of Single Touch Button from Programming DKT
1. Choose Program 207 and press
2. Choose Primary DN number and press
FB01
3. Press
FB02
4. Press
Table 1-25 Programs 208~218
Button Sequence
208 Station Timer
Assignments
208 Hold
,
208-00 Primary DN
Hold
n,
208-01 ABR Retry Count
FB01 Hold
, n,
208-02 ABR Retry Interval
Timer
FB02 Hold
, n,
208-03 ABR Recall Timer
FB03 Hold
, n,
208-04 Hold Recall Timer
FB04 Hold
, n,
208-05 First Interdigit Timer
FB05 Hold
, n,
208-06 Second Interdigit
Timer
FB06 Hold
, n,
208-07 Ring Xfer No Answer
Timer
FB07 Hold
, n,
1-46
One Touch Data Entry Sequences (continued)
Hold
and input digits for FB and press
Vol Up FB01
and Press [ ][
Value(s)
n = 1~640
n = 5~20
(default = 15)
n = Up to 5 digits
(default = 60)
n = Up to 9 digits
(default = 20)
n = Up to 5 digits
(default = 60)
n = 0~32
(default = 15)
n = 0~180
(default = 5)
n = 0~600
(default = 32)
Hold
,
Setting code from DKT
[Vol Up] + [Spdial]
[Vol Up] + [Redial]
[Vol Up] + [Cnf/Trn]
[Vol Up] + [Vol Up]
[Vol Up] + [Vol Down]
[Vol Up] + [FB on DKT]
[Vol Up] + [FB on ADM]
[Vol Up] + [FB on DSS]
key.
Hold
Key.
Hold
key. In this case 12.
0425851234
] .
Assigns timing parameters to Primary DNS.
Enter the Primary DN.
Up to 5 digits (default = no value)
Enter the number of retry attempts made by ABR when dialing a busy
telephone number.
Select the amount of time (in seconds) ABR waits between dialing
attempts.
Select the number of seconds ABR will call back the station after
receiving ring back tone from the dialed number.
Select the number of seconds before a call is placed on hold recalls.
Select the amount of time a Station has to dial after going off hook
before a call is terminated (ROT is heard).
Select the amount of time the system waits between dialed digits
before terminating a call (ROT is heard).
Select the Ring Transfer Idle station or Busy station (Camp-on) Recall
Time (in seconds).
Strata CIX/CTX Telephone Button Programming 11/04
Display Data
&SPD
&RDL
&CNF
&UP
&DWN
&FByy (yy=01-24)
&ADxyy (x=1,2 yy=01-20)
&DSxyy (x=1-8 yy=01-60)
Summary