Hold ✱#✱#1✱2✱3; Telephone Button Commands - Toshiba Strata CIX Programming Manual

Telephone Button Commands

1. Use the following buttons to execute the commands:
Hold
• ñ Enter.
Page Scroll
/
•
Spkr
ñ This delimiter moves cursors between sub-parameter values.
•
Vol
▲ ñ Escape.
•
sequences.
Vol
▼ ñ Back space for line editing.
•
# # Hold
ñ Cancel.
•
*
• ñ Use this button between values to specify a range of objects to be programmed (e.g.,
1001*1005 enables programming of stations 1001 through 1005).
**
• ñ Use this button between values to specify a set of objects to be programmed (e.g.,
1001**1005**1012 enables programming of stations 1001, 1005 and 1012).
• Off-hook ñ lift and replace the handset to immediately exit programming mode.
2. Keep the following in mind as you maneuver through Strata CTX programs.
• Default and/or current settings are displayed on the telephone LCD with an asterisk.
• Some Strata CTX Programs have more than 20 programmable parameters. To toggle from
parameters
Mode.
• To view parameter options on your telephone LCD, press the desired
Scroll Page
or
Each parameter shows a number to the left (e.g., 2:DISABLE). Program the desired parameter by
•
pressing the number button (in this example
To enter data, use the number keys.
•
• To submit your program entry press
• To exit a program press
• To enter the
sign appears in your LCD. Press the
• If you get an error code, press
page 2-1 for error code details.
Programming Parameters
Programs can have between one and 40 programmable parameters, each represented by the
buttons. The LEDs light up for each
parameter is programmed by entering values into the LCD from the telephone button pad.
1. At the SELECT PARAM prompt, press the appropriate
2. Enter the appropriate value from the telephone button pad using the Parameter Fields tables supplied
with each program.
Hold
3. Press to submit.
4. Press another
Hold
... or press
Programming Sub-parameters
Some commands enable programming of Sub-parameters to further refine Strata CTX settings. Internet or
Network IP addresses are entered using sub-parameter data. IP addresses are displayed as four three-
digit values, or Octets, separated by ìperiodsî (e.g., 192.168.255.253). Your programming telephoneís
LCD is only capable of displaying the IP information three digits, or one Octet, at a time.
Strata CIX/CTX Telephone Button Programming 11/04
ñ Scroll up or down.
Vol &
▲ displays as
FB01 FB20 FB21
~ and ~
button.
Hold
# # Hold
.
character in your data string press the Vol▲ and the
#
Hold
(twice) to continue programming. See
FBnn
button that features a programmable parameter. Each
FBnn
button to program more parameters
again to program.
Vol
▲ to program
on the LCD. Press
FB40 Scroll
press the or
2
) that corresponds to your desired parameter.
. To confirm a submitted entry, press
#
button, then enter the remaining data.
FBnn
button.
Telephone Button Programming
Telephone Button Overview
*
#
or in dialing
Page
button after entering Program
FB
button and press the
Hold
again.
#
button simultaneously. An
ìSystem Error Codesî
&
on
FBnn
1-3