Toshiba Strata CIX Programming Manual page 94

Telephone Button Programming
500 Series Programs
Table 1-37 Programs 579~580 (continued)
Button Sequence
579-10 Central VM Callback
FB10 Hold
, n,
579-11 CFWD All Call Record
FB11 Hold
, n,
579-12 CFWD Busy Record
FB12 Hold
, n,
579-13 CFWD No Answer
Record
FB13 Hold
, n,
579-14 Direct Call
FB14 Hold
, n,
579-15 Retrieve Messages
FB15 Hold
, n,
579-16 Voice Main DN
FB16 Hold
, n,
579-17 Length of VM ID
FB17 Hold
, n,
580 Voice Mail Port Data
580 Hold
,
580-00 VM Port DN
Hold
n,
580-01 Control Method
FB01 Hold
, n,
580-02 Send A/D Tone
FB02 Hold
, n,
580-03 Send B Tone
FB03 Hold
, n,
580-04 End-to-end
FB04 Hold
, n,
1-90
Value(s)
n = Up to 7 digits
n = Up to 4 digits
(default = 91)
n = Up to 4 digits
(default = 91)
n = Up to 4 digits
(default = 91)
n = Up to 4 digits
(default = 91)
n = Up to 4 digits
(default = 91)
n = Up to 7 digits
(default = 91)
n = 1~10
(default = 91)
Hold
,
n = Up to 5 digits
n = 1. Inband/DTMF
2. SMDI
(default = no value)
n = 1. Enable (default)
2. Disable
n = 1. B Tone
2. No Tone (default)
3. B Tone and Extension
Number
n = 1. Enable (default)
2. Disable
Hold
,
Summary
Enter the pilot DN for the centralized voice mail system. If this field is
left blank, the previously stored number will be deleted.
Enter DTMF VM-ID prefix string for calls arriving to voice mail via
ìCall Fwd All Calls.
Enter DTMF VM-ID prefix string for calls arriving to voice mail via
ìCall Fwd Busy.î
Enter DTMF VM-ID prefix string for calls arriving at the voice mail via
ìCall Fwd No Answer.î
Enter DTMF VM-ID string for a call arriving at the voice mail as a
Direct Call.
Enter DTMF VM-ID string for calls arriving at the voice mail to retrieve
messages.
Use a VM Pilot DN as a transfer destination.
Select the number of characters in VM-ID string.
Assign characteristics of individual voice mail ports.
Enter the DN of an individual VM port. For direct transfer to voice
mail, enter the remote Node ID and Pilot DN.
Note Do not enter a Pilot DN. This feature is available only with
CTX Release 1.3 or higher software and with CTX WinAdmin
Release 1.3 or higher software.
Specify In-band or SMDI integration. Select SMDI for Remote voice
mail.
Select whether Strata CTX sends A or D tone when a station
connecting to voice mail answers or disconnects.
Enable Strata CTX to send B tones in the event of a Blind Transfer
Recall.
Enable Strata CTX to send DTMF tones to voice mail in response to
key presses from a digital telephone.
Strata CIX/CTX Telephone Button Programming 11/04