Toshiba Strata CIX Programming Manual page 40

Telephone Button Programming
200 Series Programs
Table 1-16 Programs 203~204 (continued)
Button Sequence
204-15 Ringing Preference
FB15 Hold
, n,
204-16 Text Message Display
FB16 Hold
, n,
204-17 Call History Memory
FB17 Hold
, n,
204-18 DTMF Back Tone
FB18 Hold
, n,
204-19 Continuous DTMF
FB19 Hold
, n,
204-20 Display Language
FB20 Hold
, n,
204-21 Adapter
FB21 Hold
, n,
204-22 Blind Transfer
FB22 Hold
, n,
204-23 Mail Box Selection
FB23 Hold
, n,
204-24 MIC Init. Value
FB24 Hold
, n,
204-25 Microphone
FB25 Hold
, n,
204-26 Speaker Mode Tones
FB26 Hold
, n,
1-36
Value(s)
n = 1. Longest
2. Call Type
n = 1. Immediate
2. Not Immediate
n = 0~100
n = 1. Continuous
2. Not Continuous
n = 1. English
2. British English
3. French
n = 1. None
2. BPCI
3. BATI
n = 1. Leave
2. Separate
n = 1. Auto
2. Manual
n = 1. On
2. Off
n = 1. Enable
2. Disable
n = 1. Yes
2. No
Summary
Ringing call answer preference.
•
Longest Ringing - any call type - Calls are answered in order of
the longest ringing line no matter what type of call (FIFO).
•
Longest Ringing - by call type priority - Call Type priority is
applied to the longest ringing button.
Call Type Priorities are fixed in software as shown below:
1. Emergency Calls
2. Hands Free Calls (after it is switched to ringing by the caller).
3. ACD calls
4. Recalls (Hold recall, Automatic call back, ABR, etc.)
5. External Calls (DID, DIT DISA line calls etc.)
6. Internal Calls (station, Attendant, Tie line, door phone, etc.)
Select whether to display an LCD text message.
•
Immediate - displays the message.
•
Not immediate - does not display the message.
Enter the number of calls to be stored in memory for this station.
Not Used, has no effect on system operation
Enable / Disable Continuous DTMF.
For each iES32 PDN, set to ìnot Continuousî, if set to ìContinuousî,
outdial notification to pagers and calls to AMIS nodes will not function
properly.
Possible values: Enable, Disable
Select the LCD Display Language.
Select the Adapter Type (Desktop OAI or Attendant Console).
•
None (default), BPCI or BATI
•
BPCI ñ for USB interface.
•
BATI ñ for PC Attendant Console Interface.
Set Blind Transfer Action (Attendant Type Only).
Select the method to enter the destination Mailbox for Call Recording.
If set to ìAutoî CTX uses the VM ID of the station initiating the record
function.
Notes
•
The DN assigned as the MSG center in PROG 200 is used to call
the VM port or Hunt group (PROG 200 FK 22).
•
When set to ìAutoî the VM-ID of the station initiating the record
function is sent to Stratagy ES as the destination mailbox.
•
When set to ìManual Inputî the user may enter any valid Mailbox
followed by the ì#î sign. If the user Presses ì#î without additional
data the CTX will send the VMID of the originating station.
Turn on the microphone automatically when making a speaker phone
call. The microphone must be enabled.
Enable microphone.
Enable telephone to receive Call Waiting (Camp-on) and Ring Over
Busy Tone while on a speaker phone call.
Strata CIX/CTX Telephone Button Programming 11/04