Panasonic EASA-PHONE KX-T123210 Installation Manual page 112

. . . . . . . . . . . . . . . . until the desired
jack number (01 through 32)appears.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired
mode appears
Option ' .........' default(all 32 jack numbers)
Forced
! . . . . . . . . . . . .
*BE
r;;l
: to assign the same on all 32 jack numbers
ml\ : on jack number 01
@l' m : on jack number 32
Description
This feature gives each message of the SMDR
an account code of the called or calling party.
This feature has two modes " Forced" and
" Option" .In the " Forced" mode, the account
code must be entered every time extension
user dials.
In the " Option" mode, the account code may
be entered when a record is needed. Refer to
" Account Code" page 4-39.
Programming
Dial (64). 1.
2.
3.
4.
" Call Accounting" will be displayed.
Press the NEXT button.'
" Jack NO?+" will be displayed.
Press the NEXT button or dial the jack
number (01 through 32).
' %Ol : Option" will be displayed and the
-jack number
" Option" will blink.
Press the SELECT button to alternate
between " Option" and " Forced" to select
the desired mode.
5. Press the MEMORY button.
The LCD will stop blinking.
6.
l
To advance to the next jack number,
press the NEXT button.
l To return to the previous jack number,
press the PREV button.
l To go to the desired jack number,
press the SELECT button and then dial
the jack number.
7. Repeat steps 4 to 6, to program the account
code of the other jack numbers.
8. To return to the initial program mode, press
the END button.
Programming Table
See page 7-22.
3-70