Panasonic EASA-PHONE KX-T123210 Installation Manual page 54

_ .......................... until the desired mode appears
Man ......... Day/Night service is manually switched
....... default
Auto ......... Day/Night service is automatically switched
Description
Allows Day/ Night service to be selected
manually or automatically.
In case of manual switching, refer to " Flexible
Night Service" on page 4-37.
In case of automatic switching, set the " Starting
Time (Day/Night Service mode)" on page 3-13.
The following features will be switched
Day mode or Night mode.
l
" Flexible Outward Dialing Assignment" on
page 3-47.
l " Flexible Ringing Assignment"
on page 3-49.
l " Delayed Ringing Assignment" on page 3-52.
l " CO Direct In Line Assignment" on page 3-54.
l " Service Class Assignment of Toll Restriction"
on page 3-64.
0 " Ringing Assignment from Doorphone" on
page 3-75.
Programming
1. Dial (06).
" Day/Night Mode" will be displayed.
2. Press the NEXT button.
" Mode Change : Man" will be displayed
and " Man" will blink.
3. Press the SELECT button to alternate
between " Man" and " Auto" to select the
desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Conditions
When the Switching of Service Mode (Day/Night
Service Mode) is set to" Auto" , the present
Day/ Night Service mode will not change after
you finish programming.To change the present
mode,manual operation is required. After you
selected the Starting time (Day/ Night Service
Mode)page3_13,select the present Day/Night
mode by" Flexible Night Service" on page 4-37.
Programming Table
See page 7-4.
3-12