Panasonic EASA-PHONE KX-T123210 Installation Manual page 65

~.............................. until the desired memory number (01 through 20) appears
: ........................
CDE =
exchange
code
with 3
digits
Nothing is stored ......... default (all 20 memory numbers)
I...................................
AB=llb]: memory number 01 for storage of exchange code
memory number 20 for storage of exchange code
Description
For Service Class 5 (See " Toll Restriction" on
page 3-17) up to 20 exchange codes can be
selected for use in local dialing (charged).
All exchange codes except those entered will
be denied.
All extensions programmed for Service Class
Sele_ctions 5 are assigned to the same exchange
code selection plan.
Programming
4. Dial the exchange code, using 3 digits.
0 To erase a wrong entry, press the CLEAR
button.
5. Press the MEMORY button.
0
6.
l
0
The memory indicator will be lit.
To advance to the next memory number,
press
the NEXT button.
To return to the previous memory number,
press the PREV button.
To go to the desired memory number,
press the SELECT button and then dial the
memory number.
1.
2.
3.
Dial (15).
0
" Cls-5 Local Code" will be displayed.
Press the NEXT button.
" Local NO ? + " will be displayed.
7. Repeat steps 4 to 6.
Dial the memory number (01 through 20)
or press the NEXT button.
Example:
When dialing (01) or pressing the NEXT
button.
8. To return to the initial program mode, press
the END button.
Programming Table.
See page 7-5.
0 The LCD will show " Local 01 : .+." when
nothing is stored in memory number
" 01 I' .
When exchange code 392 has been
stored, " Local 01 : 392" will be
displayed.
,
3-23