Panasonic EASA-PHONE KX-T123210 Installation Manual page 180

To Change into Other Ali CO Numbers
To Change into Message Waiting Button
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
Press CO
which you want
to change
into other all
CO numbers
Dial 'W Press
MEMORY
l
After programming all CO buttons, return
l
After programming CO 1 button, return
the MEMORY switch to the
"SET"
position.
the MEMORY switch to the
"SET"
position.
Description
Description
Allows CO button to change into all CO numbers
which are not assigned to CO button.
Allows only CO 1 button to change into
the message waiting button except the
KX-T123230, KX-Tl23220, KX-T123250 and
KX-T30830.
Operation
0
0
1.
2.
3.
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to
"PROGRAM".
Press the CO button which you want to change
into other all CO numbers.
When pressing CO 1 button,
"CO-01" will be displayed.
Dial (+).
"Other CO key" will be displayed.
Press the MEMORY button.
After programming all CO buttons, return the
MEMORY switch to the "SET" position.
4-55
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
_I
El
Press CO 1
Operation
0
a
1.
2.
3.
0
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to
"PROGRAM".
Press CO 1 button.
Dial (3).
Press the MEMORY button.
After programming CO 1 button, return the
MEMORY switch to the "SET" position.
For operation, refer to "Message Waiting"
on page 4-36.