Panasonic EASA-PHONE KX-T123210 Installation Manual page 119

until the desired mode appears
Hold-l
...........Flash hookswitch
only . . . . . . . . . . . . . . . . . . . . . . . . . default
Hold-2 ..=........Flash hookswitch and dial 20
-1
I Description
If a standard telephone at the extension ring
immediately after hanging up or about 30 set
later, this programming step will eliminate the
problem by requiring the extension to dial 20
after hook flashing in the Hold-2 mode.
The following operation is changed when
" Hold-2" mode is set.
Call Park (on page 5-4)
Call on Hold (on page 5-4)
Conference (on page 5-5)
Call Waiting (on page 5-5)
Call Splitting (on page 5-6)
Call Transfer (on page 5-6)
Paging And Transfer (on page 5-8)
External Feature Access (on page 5-9)
Account Code (on page 5-10)
Programming
1.
Dial (91)
" Option" will be displayed.
2. Press the NEXT button.
" Hold-l" will be displayed and blink.
3. Press the SELECT button to alternate
between " Hold-l" and " Hold-2" to select
the desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming Table
See page 7-25
3-77