Panasonic EASA-PHONE KX-T123210 Installation Manual page 178

To Change into Other CO Number
To Assign into Trunk Group Access Number
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
0 Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
o
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
Press CO
which you
want to
change into
different
CO number
Dial "0" Dial Press
CO number
MEMORY
which is
set newly
(01 through 12)
Press CO
which you
want to
change into
trunk group
number
Dial "#" Dial
Press
trunk group
MEMORY
number
(1 through 8)
l After programming all CO buttons, return
the MEMORY switch to the "SET" position.
l
After programming all CO buttons, return
the MEMORY switch to the "SET" position.
Description
Allows each CO button to change into CO
number which is different from printed CO
number.
Operation
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
0 Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
1. Press CO button which you want to change into
different CO number.
When pressing CO 1 button,
"CO-01" will be displayed.
2. Dial (0).
'CO- "will be displayed.
3. Dial the CO number which is set newly (01
through 12).
When dialing (02),
"CO-02" will be displayed.
4. Press the MEMORY button.
l After programming all CO buttons, return the
MEMORY switch to the "SET" position.
Description
Allows each CO button to change into
the trunk group access number (81 through 88).
Operation
0
0
1.
2.
3.
4.
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
Press the CO button which you want to change
into trunk group access number.
Dial (a).
Dial the trunk group number (1 through 8).
,
Press the MEMORY button.
After programming all CO buttons, return the
MEMORY switch to the "SET" position.
,:'.
: ._
4-53