Panasonic EASA-PHONE KX-T123210 Installation Manual page 118

j"^i___~".~-.. ___..-- _i
,.........................
. . . . . . . . . . ..until the desired doorphone number (1 or 2) appears
,..................................................
until the desired jack number appears
m : on jack number 01
@ : on jack number 32
I# : to assign the same on all 32 jacks
until the desired mode appears
Description
Allows each extension to be programmed for
receiving calls from up to 2 doorphones during the
night mode.
-(Doorphone is an option.)
6. Press the MEMORY button.
The LCD will stop blinking.
7. o To advance to the next jack number,
press the m button.
Programming
1. Dial (71).
" Night Door Phone" will be displayed.
2. Press the NEXT button.
" Door NO ? +" will be displayed.
3. Press the NEXT button or dial the doorphone
number (1 or 2).
" DP-1 :Fnable" will be displayed.
lack number
4. Repeat pressing the m button until the
desired jack number appears, or press the
q
button and then dial the jack number.
8.
l
To return to the previous jack number,
press the m button.
l
To go to the desired jack number,
press the
q
button and then dial the
jack number.
9.
10.
Repeat steps 5 to 7, to program the assignment
of the other jack numbers.
Repeat steps 3 to 8, to program the assignment
of the another doorphone.
To return to the initial program mode, press the
END button.
5. Press the SELECT button to alternate between
" Enable" and " Disable" to select the desired
mode.
Programming Table
See page 7-25.
3-76