Panasonic EASA-PHONE KX-T123210 Installation Manual page 128

I
Lift handset
I
I
Dial " 8 I'
or press
SP-PHONE
H Individual Trunk Group Access
i%:
for
dial tone
Dial trunk
group number
(1 through 8)
' 1
1 ,
Dial
phone
number
Talk Hang up
handset or
press
SP-PHONE
l
YOU may press the CO button instead of dialing
8 and trunk group number (1 through 8). In this
case, you must assign the trunk group access
number to the CO button.
To assign, see " Flexible CO button" on page
4-53.
Description
Each extension can automatically select an idle
CO line within the same trunk group. Through
programming, 12 CO lines can be divided up to 8
groups. See the page 3-46.
Operation
1.
Lift the handset or press the SP-PHONE
button.
2. Dial (8) and the trunk group number (1 through
8) or press the CO button which is changed into
trunk group access number.
Dial tone from the CO (Central Office) will be
heard.
3. Dial the phone number.
4. Start talking.
5. Hang up or press the SP-PHONE button.
Conditions
l
The CO line which is not assigned to the CO
Button cannot be dialed.
o The CO lines that is assigned to the trunk
group are set below.
Default;
CO
1
is assigned to Trunk group 1.
CO 2 is assigned to Trunk group 2.
CO 3 is assigned to Trunk group 3.
CO 4 is assigned to Trunk group 4.
CO 5 is assigned to Trunk group 5.
CO 6 is assigned to Trunk group 6.
CO 7 is assigned to Trunk group 7.
CO 8 through CO 12 is assigned to Trunk
group 8.
I
Each extension can access a new
-
CO line without hanging up.
Lift handset
FP%ZNE
Press AUTO
Dial speed
access code
(00 through 99)
Description
There are 100 memory locations of system
speed dialing available. A maximun of each
memory location is 32 digits.
For programming, refer to " System Speed
Dialing Entry" on page 3-5.
Operation
1. Lift the handset or press the SP-PHONE
button.
2. Press the AUTO button.
3. Dial the speed access code (00 through 99).
l
You may press the CO button to select the
CO line directly after lifting the handset or
press the SP-PHONE button.
Conditions
The dialed number will be displayed on the
LCD of the KX-T123230 / KX-T61631 /
KX-T61630 / KX-T30830.
Continuous use of speed dialing is possible.
ex. [AUTO] [0] [0] [AUTO] [0] [1]
Chaining together two or more memory
locations.
Combinations of speed dialing, one touch
dialing and manual dialing is possible.
While having a conversation,
e The original conversation will be
terminated and a new CO line
Press
will be accessed.
another CO
4-3